stainless steel sieve bend screen for coal dewatering
Category: | Wedge Wire Application |
---|---|
Material: | SS 304,316,316L, Stainless steel and carbon steel |
Properties: | sieve bend screen |
Application: | water treatment, oilfield, mining, food industry, chemical industry, papermaking industry, decoration. |
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Details of stainless steel sieve bend screen for coal dewatering
stainless steel wedge wire Sieve Bend Screens is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire).
Characteristics for stainless steel sieve bend screen for coal dewatering:
The benefit of arc wedge wire screen panel is more open area, have very precise openings ,maximum design flexibility, stronger and more durable, economical ,easier installation and long-term operating etc.
Applications for stainless steel sieve bend screen for coal dewatering:
wedge wire screen is widely used in filters, strainers, architectural screens, water treatment underdrains, media support grids and overlays, infiltration gallery screens, lauter tun screens,many other liquids, solids separation applications.
Features for stainless steel sieve bend screen for coal dewatering:
1) Compact construction, heat resistant, rust-resistant, good mechanism performance, long working life, wear-resistant, low temperature resistant, long replacement cycle, saving production costs.
2) well-proportioned screen aperture, not prone to jam, increase quality and efficiency of refined powder.
3) Proper construction, saving time and strength during installation and replacement, i.e. reducing time for installation, examination and maintainance, decreasing labor strength.
Specifications of stainless steel sieve bend screen for coal dewatering:
Specification (wedge wire):
|
Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70
Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00
|
Specification (support rod):
|
Width(mm): 2.30 3.00 3.30 3.70
Height(mm): 2.70 3.60 4.70 5.60 6.30
Round: From 2.50mm to 6.0mm
|
Note: other specifications available as per request
|
|
Slot size
|
0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.
|
Material:
|
galvanized low carton (LCG), stainless steel (304,316 etc.)
|
Length
|
up to 6 meters.
|
Diameter
|
from 25mm to 1200mm.
|
End connection
|
Plain beveled ends, flanged or threaded couplings
|
Packaging and Transportation of stainless steel sieve bend screen for coal dewatering: