More Views
Stainless Steel Continuous-Slot Water Well Screen Pipe
| Category: | Wedge Wire Application |
|---|---|
| Material: | SS 304,316,316L, Stainless steel and carbon steel. |
| Properties: | screen pipe |
| Application: | water, oil, and gas wells, and is the dominant screen type used in the water well industry |
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Details of Stainless Steel Continuous-Slot Water Well Screen Pipe
Continuous-slot water well screen pipe is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights. Slot opening for continuous screens are manufactured by spacing successive turns of the outer wire to produce the desired slot size. All slots should be clean and free of burns and cuttings.
Application for Stainless Steel Continuous-slot Water Well Screen Pipe:
Continuous-slot water well screen pipe is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry.
Characteristics for Stainless Steel Continuous-slot Water Well Screen Pipe:
The continuous-slot water well screen pipe is the heart of the well. Our design, application and well maintenance technology is recognized by industry professionals globally. The well's success or failure largely depends on proper screen selection. Wedge Wire Screen is committed to advancing water well screening technology and solutions well into the futur
Advantages for Stainless Steel Continuous-slot Water Well Screen Pipe:
1) Screens with high open area are more suitable for the construction of high-quality water wells and gas wells.
2) Low cost operation.
3) Reduce the abrasion of the pump.
4) Extend the life span of wells, low-carbon, Galvanized or stainless steel construction.
Specifications of Stainless Steel Continuous-Slot Water Well Screen Pipe:
|
Profile Wire
|
|
|
|
|
|
|
|
|
|
Width(mm)
|
1.5
|
1.5
|
2.3
|
2.3
|
1.8
|
3.0
|
3.7
|
3.3
|
|
Height(mm)
|
2.2
|
2.5
|
2.7
|
3.6
|
4.3
|
4.7
|
5.6
|
6.3
|
|
Support Rod
|
|
|
|
|
|
Round
|
|
Width(mm)
|
2.3
|
2.3
|
3.0
|
3.7
|
3.3
|
Ø2.5~Ø5mm
|
|
Height(mm)
|
2.7
|
3.6
|
4.7
|
5.6
|
6.3
|
|
Packaging and Transportation of Stainless Steel Continuous-Slot Water Well Screen Pipe:
You may also be interested in the following product(s)
Compare Products
Tel
WhatsApp
Message
Email
- Contact Us
- Name:Xueyi Ma
- Tel:+86 311 8595 5658