Sepcification details of wedge wire header lateral
Wedge wire header lateral is made of V shaped stainless steel wire. It has flow area, water distribution uniformity, the high mechanical strength, temperature,pressure,anti aging, anti corrosive has been greatly enhanced. Stainless steel wire around the space under the index finger to the size of the design.
Features of wedge wire header lateral
1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation.
3. Reduce the abrasion of the pump.
|
|
|||
|
Material |
SS304, SS304L, SS316, SS316L, SS321, 904, C276, 2205, 2207, Duplex, Hastelloy, etc |
||
|
Normal Lateral Tube QTY (PCS) |
4, 6, 8, 12,16, etc. According to request, actual flow rating, and application. |
||
|
Lateral OD Range (mm) |
25 to 80mm, customized |
||
|
Normal Header diameter (mm) |
According to flow rating, thread and flange diameter, and customers’ requirement |
||
|
Header and lateral connector types |
Thread, Flange |
||
|
Diameter Range(mm) |
According to the tank diameter. (Usually 200mm shorter than tank diameter) |
||
|
Slot Range(mm) |
Normal slot 0.2, 0.25, 0.3, 0.35, 0.4mm.
Slot according to request. |
||
|
Wedge Wire(mm) |
1x2 |
1.5x2 |
2x3 |
|
Support Rod (mm) |
1.5x2.5
2x3 |
1.8x2.5
2x3 |
2x3
2x4
|
|
Note |
Customized According To Requirement |
||
Compare Products
