Stainless steel Wedge Wire welded v wire water well screen pipe
Category: | Wedge Wire Pipe&Cylinder |
---|---|
Material: | stainless steel 304,304L,304HC,316,316L,321,430 or as per your request. |
Properties: | wedge wire screen pipe |
Application: | water-treatment , water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant,refining & petrochemical |
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Details of Stainless steel Wedge Wire welded v wire water well screen pipe
Stainless steel Wedge Wire welded v wire water well screen pipe is made by a v or wedge profile wire around an internal array of longitudinal support rods. Each intersecting point of these wire is fusion welded to form a precise and uniform mesh. Wedgewire profile screen combines superior weld strengths with accurate slots tolerances resulting in a reliable sand control screen applied in well drilling industries. Our stainless steel well screen offers stable structure and good strength, can withstand the pressure and corrosion during the downhole well completion and operation.
Advantage of Stainless steel Wedge Wire welded v wire water well screen pipe
1. A continuous slot opening which significantly increases the available open area, thus providing greater access to the water bearing zone
2. Uninterrupted flow.
3. A uniform and efficient well development due to the continuous slot opening.
4. Good strength, no further support structure needed.
Application of Stainless steel Wedge Wire welded v wire water well screen pipe
The continuous-slot well screen strainer is recommended in the following situations:
Formation comprised of small or fine particles
Water wells where gravel packs will be installed
Thin aquifers, where maximum open area is required
Small diameter wells
Specifications of Stainless steel Wedge Wire welded v wire water well screen pipe:
Materials: Grades of simple stainless steel 304, 316, 304L right up to highly corrosion resistant alloys.
Slot opening: Slot should be bigger than 0.020mm and less that 2500mm long.
Wire shapes and sizes: Custom
Combination of wire and rods: Available to meet the open area and strength requirements for the particular application.
Technical data of 304 316Lstainless steel wedge wire screen
No. | (mm)TYPE | OD (mm) | ID (mm) | Support wire Number | Filter direction |
1 | SRD25.4 | 25.4 | 18.6 | 12 | FOTI |
2 | SRD 33 | 33 | 24 | 8 | FOTI |
3 | SRD 37 | 37 | 28 | 8 | FOTI |
4 | SRD 40 | 40 | 31 | 8/10 | FOTI/FITO |
5 | SRD 45 | 45 | 36 | 10/12 | FOTI/FITO |
6 | SRD 48 | 48 | 38 | 12 | FOTI/FITO |
7 | SRD 60 | 60 | 51 | 12 | FOTI/FITO |
8 | SRD 70 | 70 | 61 | 12/18 | FOTI/FITO |
9 | SRD 85 | 85 | 76 | 18 | FOTI/FITO |
10 | SRD 110 | 110 | 101 | 24 | FOTI/FITO |
11 | SRD120 | 120 | 111 | 24 | FOTI/FITO |
Packaging and Transportation of Stainless steel Wedge Wire welded v wire water well screen pipe: