Quality Wedge Wire Screen Manufacturer in China

Screw Press Screens

More Views

Screw Press ScreensScrew Press ScreensScrew Press Screens

Screw Press Screens

Category:Wedge Wire Pipe&Cylinder
Material:SS 304,316,316L, Stainless steel and carbon steel.
Properties:Wedge wire screen
Application:water-treatment , water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant ,sewage treatment

if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.

Skype:Enla

Details of Screw Press Screens

Screw presse screens are used in a wide variety of dewatering applications, often in the same applications as belt presses, centrifuges, and filter presses. The screw press is a simple, slow moving mechanical device. Dewatering is continuous and is accomplished by gravity drainage at the inlet end of the screw and then by reducing the volume as the material being dewatered is conveyed from the inlet to the discharge end of the screw press.

Applications of Screw Press Screens:

Screw press screens are mainly used for the water-treatment , water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant ,sewage treatment and other industries,water, oil or gas filter and other filtration equipment..
Screw presses are used in a wide variety of dewatering applications, often in the same applications as belt presses, centrifuges, and filter presses.

Features of Screw Press Screens:

1) Non-clogging surface

2) Large open area

3) Low pressure drop

4) Hydraulic efficiency

5) High flow rates

6) Mechanical strength

7) Abrasion-resistant

8) Easy cleaning

Screw press screens

Specifications of Screw Press Screens:

Specification (wedge wire):
Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70....
Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00....
Specification (support rod):
Width(mm): 2.30 3.00 3.30 3.70....
Height(mm): 2.70 3.60 4.70 5.60 6.30....
Round: From 2.50mm to 6.0mm....
Note: other specifications available as per request
Slot size
0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.
Material:
galvanized low carton (LCG), stainless steel (304,316 etc.)
Length
up to 6 meters.
Diameter
from 25mm to 1200mm.
End connection
Plain beveled ends, flanged or threaded couplings

Packaging and Transportation of Screw Press Screens:

Screw press screens

Orders and Returns

If you are interested in receiving more information or have a question regarding any of our products. Please fill out the form below and we will contact you within 24-48 hours.

Tel
Skype
Message
Email
Contact Us
Name:Anna
Tel:0086-311-83289301