SS 304 wedge wire resin trap
Category: | Resin Traps |
---|---|
Material: | stainless steel 304,304L,304HC,316,316L,321,430 or as per your request. |
Properties: | resin trap |
Application: | water-treatment , water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant,refining & petrochemical |
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Details of SS 304 wedge wire resin trap
SS 304 wedge wire resin traps are used down stream from ion exchange vessels and serve as a means of minimizing the loss of ion exchange resins. We can design the traps to capture media particles of any size.
Wedge wire resin trap is normally closed on one side and has a flange on the other. They can be made for flow-in-to-out (FITO) or flow-out-to-in (FOTI) filtration.A strainer is often used in tubes to block unwanted particles or dirt that would otherwise damage downstream equipment. Cleaning is carried out by removing the strainer from the tube.
Feature of SS 304 wedge wire resin trap
1. It has high mechanical strength, can bear large pressure drop.
2. The wedge type slot can improve backflushing and regeneration performance.
3. Resistance to pressure, temperature, aging, corrosion, uedes in kinds of fluid.
4. Equal slots for filtering, can form equally distributed filter cake, easy to clean for reuse.
Application of SS 304 wedge wire resin trap
Wedge wire resin trap are mainly used for the water-treatment , water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant ,sewage treatment and other industries,water,oil or gas filter and other filtration equipment.
Specifications of SS 304 wedge wire resin trap:
Material | SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc | |||||
OD Range | 25mm-2000mm | |||||
ID Range | 19mm-1981mm | |||||
Length Range | Up to 6000 mm | |||||
Slot Range | 20 micron to 3000 micron (Tolerance:+-5 micron) | |||||
Wedge Wire | 0.5x1.5 | 0.75x1.5 | 1x2 | 1.5*2 | 2x3 | 2*4 |
Support Rod |
1.5x2.5 2x3 |
1.5x2.5 2x3 |
1.5x2.5 2x3 |
1.8*2.5 2x3 |
3*5 | 3*5 |
Connection | Flange and thread | |||||
End Type | Closed plate | |||||
Note | Customized According To Special Requirement |
Packaging and Transportation of SS 304 wedge wire resin trap: