Specification of Wedge Wire Screen Cylinder
Wedge wire screen cylinders are made up of rods and wire. The rod can be round wire, triangular wire or trapezoid wire. The wire is triangular wire (V-shaped wire). Wedge wire screen cylinder have a structure and high open area, as well as accurate slot dimension. At the same time, water well screens have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering.
Details as following:
|
|
|||||||
|
Material |
SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc |
||||||
|
OD Range |
Min 68mm, the biggest according to clients’ request |
||||||
|
ID Range |
MIN 60mm, the biggest according to clients’ request |
||||||
|
Length Range |
Up to 6000 mm |
||||||
|
Slot Range |
20 micron to 3000 micron (Tolerance:+-5 micron) |
||||||
|
Wedge Wire |
0.5x1.5 |
0.75x1.5 |
1x2 |
1.5*2 |
2x3 |
2*4 |
3*5 |
|
Support Rod |
1.5x2.5
2x3 |
1.5x2.5
2x3 |
1.5x2.5
2x3 |
1.8*2.5
2x3 |
2x3
2x4
3x5
3x6
3x10
4x7 |
2x4
3x5
3x6
3x10
4x7
5x6 |
3x5
3x6
3x10
4x7
5x6
5x8 |
|
End Finishing |
Thread fitting, Flange, Closed Plated, Resistance welded closed plate, Metal Ring, etc |
||||||
|
Note |
Customized According To Requirement |
||||||
Compare Products
