Quality Wedge Wire Screen Manufacturer in China

Email us now

How to calculate the number of stainless steel filter nozzle

When many environmental protection equipment manufacturers choose stainless steel wedge wire filter nozzle instead of plastic filter nozzle, they do not know how to confirm the number of stainless steel filter nozzle, which will increase the cost and reduce the worry that the insufficient flow will affect the operation effect.

Today we share with you the reference standards given by the National Water Treatment Center:

For older products with plastic filter nozzle

You can choose water cap specifications with similar flow rates, such as 0.5T / H, 1.0T / H, etc., so that the number of water caps can refer to the original design without any changes.

Stainless steel wedge wire filter nozzle in new equipment

First, refer to the equipment flow requirement Q1, and then select a suitable water cap specification (the flow is tentatively set to Q2). The number of water caps required for the entire tank is N = Q1 / Q2 * 0.7 (0.7 is the filter loss coefficient, and the reference coefficient range is 0.65 ~ 0.75)

If you still have any questions, you can consult our technical engineers. We are the manufacturer of stainless steel wedge wire filter nozzle. With our own technical engineers and designers, we can provide you with the most professional advice.

You may also be interested in the following product(s)

Tel
Skype
Message
Email
Contact Us
Name:Anna
Tel:0086-311-83289301