Wedge vee wire parabolic sieve bend screen panel for waste water equipment
Category: | Sieve Bend Screen |
---|---|
Material: | stainless steel 304,304L,316,316L,321,430 or as per your request. |
Properties: | sieve bend screen |
Application: | water-treatment,beer brewing,water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant,refining & petrochemical |
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
Details of Wedge vee wire parabolic sieve bend screen panel for waste water equipment
Wedge vee wire parabolic sieve bend screen panel has a greater screeing capactity than a flat screen due to forces exerted as material flows against the curved surface.
This wedge vee wire parabolic sieve bend screen panel is mounted in a frame with the screen openings perpendicular to the flow.
In a typical feed situation,the leading edge of the wedge wire removes the water and fine particles through the over sized particles move across the top of the screen.
Separeation size in considerably smaller than screen openings,usually about one-half the opening size.
Sieve bend screens are ideal for sizing and dewatering applications in liquid/solid separation situations.It is extensively used for fine fiber removal in the starch industry.It also is used in other industries such as food processing waste water cleanup and corn wet milling.
Feature of Wedge vee wire parabolic sieve bend screen panel for waste water equipment
Reduced equipment and installation costs
Low mantenance costs(No moving parts)
Better flow rate and finer fiber removal
Little space needed
Wide range of applications
Longer liftetime
Application of Wedge vee wire parabolic sieve bend screen panel for waste water equipment
Used in industries such as Sugar, Coal Mining & Quarrying, Mineral Processing, Cement, and Industrial & Urban Effluent Treatment etc.
Used as a pre-filter in urban & industrial waste treatment plants to improve the performance of the clarifier by drastically reducing the load.
Used for fiber removal in Starch industry.
Specifications of Wedge vee wire parabolic sieve bend screen panel for waste water equipment:
Specification (wedge wire): |
Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00 |
Specification (support rod): |
Width(mm): 2.30 3.00 3.30 3.70 Height(mm): 2.70 3.60 4.70 5.60 6.30 Round: From 2.50mm to 6.0mm |
Note: other specifications available as per request |
|
Slot size |
0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request. |
Material: |
galvanized low carton (LCG), stainless steel (304,316 etc.) |
Length |
up to 6 meters. |
Width |
from 25mm to 1200mm. |
Radian |
60º 120º or according to your special requirement |
Packaging and Transportation of Wedge vee wire parabolic sieve bend screen panel for waste water equipment: